Please read this section of the user manual to learn more about the upgrade procedure.
When the module is in external processing mode, with an external clock for the X section, and when this clock’s patch cable is unplugged from the X clock input, so that an internal clock is now used for the X section, the acquired CV data on output X1 (which was shifted to outputs X2 and X3) is now copied to the DEJA VU loop of all three outputs.
If a 3-second pause (or a pause lasting more than 4 clock ticks, whichever is the longest) is observed on the t section’s clock signal, the rhythmic pattern played by the t section will reset to the first step at the next clock tick.
New super lock feature. A long press on the t or X DEJA VU buttons locks the random generation for this section – which will stop responding to the DEJA VU knob. When a section is in this super locked state, the illuminated push-button blinks rapidly. Press it to bring it back to normal. In other words, the t and X section can be in these 3 states:
- Illuminated push-button off: random without repetition (equivalent to DEJA VU set to the minimum).
- Illuminated push-button on: randomness amount controlled by the DEJA VU knob.
- Illuminated push-button rapidly blinking: locked loop without randomness (equivalent to DEJA VU locked to 12 o’clock).
Powering the module on while pressing the X mode selection button (N) enables (or disables) the color-blind mode. LED brightness and blinking patterns are more contrasted. Glowing, moderate brightness for the first setting, high intensity for the middle setting, low brightness for the last setting. When selecting scales, the number of blinks (from 1 to 6 – continuous) indicates the selected scale.
Fixed a bug causing the X’s section clock follower to temporarily go haywire when a patch cable is inserted in the clock input of the X section.