cereyanlimusiki

Happy Knobbing 2013, 17.-19. May, Fischbach, Germany, Earth
No videos ? :(

Comment by cereyanlimusiki 6:02AM permalink
8 pin inter-board connectors - Source in the UK?
Is there any similar web shops in Germany or France for such things ( headers , jumber cables etc. ) ?

Comment by cereyanlimusiki May 19 permalink
Recommendation required for Phaser/echo/delay units, preferably DIY
@schrab does this mean that your designs done by SpinCAD can be uploaded kit like AVT5159 ?

Comment by cereyanlimusiki May 17 permalink
MidiALF!
@kwitekp Is this OLED LCD that @qp used not the one in your BOM ? If not ; will it be OK that I order this instead of the one in BOM ? Will it look nicer with the dress that @fcd72 is going to design ?

Comment by cereyanlimusiki May 17 permalink
Recommendation required for Phaser/echo/delay units, preferably DIY
@dubtoms does this mean you can not order this mentioned kit without a Polish friend ? If yes Is there anybody around here who could help me to order one ?

Comment by cereyanlimusiki May 16 permalink
List of useful Set of Parts , Components to keep at side for DIYers ?
@fcd72 Even though I am jealous of your setup. It is so advance for me on this stage. What I am looking for is to build Ambika , MidiAlf , SonicPotions LXR and then start with a little modular setup and see where it goes. So I like the inputs f…

Comment by cereyanlimusiki May 13 permalink
MidiALF!
@loopino I received mine in Switzerland last Saturday (May 11th) which was sent on May 6th.

Comment by cereyanlimusiki May 13 permalink
rid of that backlog!
@tb323 How is Arpie ? Would you reccomend ?

Comment by cereyanlimusiki May 13 permalink
MidiALF!
Did anybody create a shopping list for Digikey out of MidiAlf BOM ? Can you share it ? Thanks

Comment by cereyanlimusiki May 13 permalink
MidiALF!
Is @fcd72 designing any case for this ? If yes , when would it be possible available ? I ordered one pcb from @kvitekp and I will build it soon but I do not like my devices to be naked :) .

Comment by cereyanlimusiki May 13 permalink
New Book: Make Analog synthesizers
@Varthdader @rumpelfilter @ByteFrenzy @mr_sibs @fcd72 @PeterHanes @rosch Guys , you are all very welcome. I am happy as I was able to made somehow a small contribution to MI community.

Comment by cereyanlimusiki May 11 permalink
New Book: Make Analog synthesizers
@rumpelfilter Yes it can be used. It is public coupon but do not know about validity date so hurry up.

Comment by cereyanlimusiki May 9 permalink
New Book: Make Analog synthesizers
@Varthdader Yes coupon is OPC10 for 3for2 I think this topic should be moved to “and now for something completely different”

Comment by cereyanlimusiki May 8 permalink
New Book: Make Analog synthesizers
@varthdader Thanks for the tip. I bought the book :) I found this coupon code DSUG2 for o’reilly website which gives you %50 discount on all ebooks so instead of 17.99 $ I paid 8.99 $

Comment by cereyanlimusiki May 8 permalink
New Book: Make Analog synthesizers
@stimresp its website still says it would be published May. Where did you purchase it ? Is it a digital copy ?

Comment by cereyanlimusiki May 8 permalink
Vince likes his Minibrute
I have one but it is still sitting in its box for about 3 months now ( This was time its delivered after waiting months even though I pre-ordered it ) due to my new born took all the priority. I played 2-3 times and I assume it will have a good u…

Comment by cereyanlimusiki May 8 permalink
Clarke - Gore techno
I thought I wrote about this earlier. VCMG is excellent production. It is made mainly with Analog devices and Modular setups. As you know both Martin and Vince are big collector of all kind of analog and vintage equipment and Martin also got in…

Comment by cereyanlimusiki May 6 permalink
250 EUR for JX-3P. Is it a good deal ?
Went there and check the gear. Sound really organic and warm but program-ability without PG-200 is impossible and volume pot has some problems. So I gave up and I will save for Ambika :)

Comment by cereyanlimusiki May 3 permalink
250 EUR for JX-3P. Is it a good deal ?
@fcd72 :) Of course I have 2 Shruthi-1 and an Anushri already. I am looking for polyphonic synth to replace my Roland GAIA SH-01 as it sounds lifeless and so thin according to my ear.

Comment by cereyanlimusiki May 2 permalink
DIY midi controller. Suggestions?
@fcd72 Yeayyyy

Comment by cereyanlimusiki April 25 permalink
FS: Ambika 6xSMR4 (Brand new Unused) [SOLD]
@shiftr Is this still available ?

Comment by cereyanlimusiki April 23 permalink
Max Anushri editor
@clemdu Thanks but I was thinking “toggle xOx programming” on editor would do this if I click on it second time.

Comment by cereyanlimusiki April 22 permalink
Max Anushri editor
@Smugrik First of all thanks again for this nice editor. I was testing the editor the other day and of course I experimented with toggle xOx programming since then I can not trigger random beats from the machine it self when I am playing it stand…

Comment by cereyanlimusiki April 22 permalink
NRPN and CC from a Novation ReMOTE 25?
@tribo can you share your template ? do you know whether it will work with Remote SL MK II ?

Comment by cereyanlimusiki April 22 permalink
New Toy On The Block
I pre-ordered Volca Beats today , thinking to order others too

Comment by cereyanlimusiki April 19 permalink
Sequencer, which?
@kvitekp I would be really interested with a kit version. @fcd72 Will there be any enclosure ?

Comment by cereyanlimusiki April 19 permalink
Census of successfully assembled kits
@macMOE it is amazing. Where can we find one ? :)

Comment by cereyanlimusiki March 27 permalink
Website feedback
@altitude I checked this already with Tapatalk support. They stated that plugin has a conflict with Vanilla forum “Mark All Viewed” plugin hence does not show unread post unless forum owner disable this plugin. I know @pichenettes is busy and …

Comment by cereyanlimusiki March 10 permalink
How to start Modular? or The LittleDieter Project (NEW BATCH OF KITS AVAILABLE)
@fcd72 Is this a test run ? Will you be populating more kits after this run as well ? I am really eager to assemble the little dieter but I will not have time in next couple of months but I do not want to miss this little monster :)

Comment by cereyanlimusiki February 26 permalink
Website feedback
Tapatalk works for me and I checked with developer of the the Tapatalk plugin; It does not support notifications yet. I made request in their repository. Let’s wait and see.

Comment by cereyanlimusiki February 26 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: cereyanlimusiki
Joined: May 2012
Visits: 618
Last Active: 2:30PM
Roles: Member