rumpelfilter

Tiny high quality multichannel audio interface; any suggestions?
One think to keep in mind when looking at USB/FW mixers like the Alesis Multimix and the Mackie Onyx is that they usually have lots of channels going into the computer but only a stereo pair coming out of it. so if you need more outputs (for extern…

Comment by rumpelfilter May 20 permalink
Tiny high quality multichannel audio interface; any suggestions?
@bleo: glad to hear that! :) Remember that Alesis does not stand out for build quality and sturdiness. but for the price I find the multimix series quite ok. @nightworxx: I don’t agree, I found presonus kit to be quite sturdy and well built, some…

Comment by rumpelfilter May 20 permalink
Solder Fume Extractor
wood dust is very dangerous and highly cancerogeneous. You really have to be careful with that. Solder fumes can cause hypersensibilisation allergy, but it’s rare and you need to be exposed to them a lot. But still, having some good ventilation won…

Comment by rumpelfilter May 18 permalink
Can i use an adapter with 1000mA?
it’s onlyimportant that the adapter has the correct voltage 9v or 7.5v, amperage is not an issue as long as it’s not too low. As nightworxx said it’s agood idea to use the adapter to power more devices with the same rating and polarity. you should …

Comment by rumpelfilter May 17 permalink
SOLD: GM5 MIDI interface small PCB almost full kit
SOLD

Comment by rumpelfilter May 15 permalink
SOLD: GM5 MIDI interface small PCB almost full kit
seen it and it’s still available!

Comment by rumpelfilter May 14 permalink
whath's the technique for......
yep rosch is right. I think I got them from Reichelt though…

Comment by rumpelfilter May 13 permalink
Where to buy Modular Synth PCBs?
also 4ms – and another guy I won’t mention or it will sound like advertising – has some interesting DIY kits and/or PCBs

Comment by rumpelfilter May 11 permalink
Where to buy Modular Synth PCBs?
I can totally recommend the Turing Machine Sequencer (thonk). Comes as a full kit and it a whole lot of fun!

Comment by rumpelfilter May 11 permalink
whath's the technique for......
you can see my 4PM programmer with fresnells here: http://weblog.papernoise.net/2012/08/shruthi-1-xt/

Comment by rumpelfilter May 11 permalink
whath's the technique for......
I found out that it’s a lot easier to solder the led flush to the PCB and then install fresnell lenses on the fontplate. Looks great with white leds, never tried other colours.

Comment by rumpelfilter May 11 permalink
Tiny high quality multichannel audio interface; any suggestions?
yeah… they always have to make these things with rock bands in mind :)

Comment by rumpelfilter May 11 permalink
Tiny high quality multichannel audio interface; any suggestions?
what about this one: http://echoaudio.com/products/echo-2

Comment by rumpelfilter May 11 permalink
Tiny high quality multichannel audio interface; any suggestions?
btw. which OS are you running?

Comment by rumpelfilter May 11 permalink
New Book: Make Analog synthesizers
Thanks for the coupon cereyanlimusiki!

Comment by rumpelfilter May 11 permalink
Tiny high quality multichannel audio interface; any suggestions?
also check out presonus if you budget is a bit on the tight side

Comment by rumpelfilter May 10 permalink
Tiny high quality multichannel audio interface; any suggestions?
@Bleo: there’s a lot of USB interfaces with more that a pair of stereo ins and outs. we use a 16 track Alesis Multimix to record our impro sessions and it works like a charm. You’re probably referring to USB1.0 and of couse I would stay clear from …

Comment by rumpelfilter May 10 permalink
Tiny high quality multichannel audio interface; any suggestions?
anyway also would say RME

Comment by rumpelfilter May 10 permalink
Tiny high quality multichannel audio interface; any suggestions?
tiny AND multichannel is a bit of a contraddiction. :) but fortunately two inputs and outputs is not really multichannel

Comment by rumpelfilter May 10 permalink
Elektor - Digital Formant
hey cool I can be the first to say: hey but it’s digital! :D no actually this seems pretty cool!

Comment by rumpelfilter May 10 permalink
Chocopoolp / Bhajis gets a plug
was about time! :)

Comment by rumpelfilter May 10 permalink
New Book: Make Analog synthesizers
thanks! Got it. Don’t think I’ll ever build a synth from scratch, but I think it might not hurt to know more about the inner workings even just to design the panels for them.

Comment by rumpelfilter May 9 permalink
New Book: Make Analog synthesizers
is the coupon usable by more people?

Comment by rumpelfilter May 9 permalink
Anyone with 15.000 bucks to spend ? :)
you can build that with a couple of 555s… well not really, still not worth it. but then if it cost 500€ I’d buy it right away! :) You know what, the problem with vintage gear prices is collectors with too much money.

Comment by rumpelfilter May 9 permalink
Coming soon from Mutable Instruments... Euro modules
And of course anything made for guitars needs even lower levels

Comment by rumpelfilter May 8 permalink
Coming soon from Mutable Instruments... Euro modules
btw. if I’m not mistaken, modular gear usually has a hotter output (about 10ppV) whereas consumer lever line output has roughly 1ppV and pro grade equipment outputs around 4ppV.

Comment by rumpelfilter May 8 permalink
Coming soon from Mutable Instruments... Euro modules
Or you can find some DIY bassdrum modules around… If you want to use your modular to process external audio there is some specialized modules to deal with the level, but honestly so far it’s been working fine without one. You need some mixers, VCA…

Comment by rumpelfilter May 8 permalink
fs/ft: eurorack modules 4ms, doepfer [price drop]
yeah to the one who should not spend money in modules now… but I couldn’t resist. And anyway, it’s all Olivier’s fault, I’ve been bravely resisting the modular temptation for years! :D

Comment by rumpelfilter May 6 permalink
Coming soon from Mutable Instruments... Euro modules
And another thing has to be said. If you are a very big company producing thousands of devices, having them assembled in China and using cheap components, then of course you can make low prices, but if you pay a lot of attention on the quality, hav…

Comment by rumpelfilter May 6 permalink
Coming soon from Mutable Instruments... Euro modules
I think it’s a fair price for the kind of module. try and have a look at what other companies sell their modules for: http://www.schneidersladen.de/category/de-hersteller/de-cwejman

Comment by rumpelfilter May 6 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: rumpelfilter
Joined: April 2010
Visits: 737
Last Active: 12:45PM
Roles: Trusted member